The US 800 is a the battery charger that gives your old car a new life. It is a complete 6V battery charger in a diminutive format that charges everything from small batteries of 1Ah up to the larger tractor batteries. Perfect for maintaining the often less used 6V vehicles.
SPECIFICATION Model 1019 Voltage AC 100–120VAC, 50–60Hz. Output power is reduced at lower input voltage. Current 0.2A rms (at full charging current) Back current drain* <1mA Charging voltage 7.2V, Nominal: 6V Ripple** Max 50mV rms, max 0.05A rms. Charging current 0.8A max. Battery cable fuse 5A Ambient temperature -4°F to +122°F. Automatic reduction of power at increased ambient temperature. Cooling Natural convection. Do not cover the charger. Charge cycle UC 800 is a four-step fully automatic charger. Type of batteries All types of 6V lead-acid batteries (Wet, Maintenance Free, AGM and most GEL). Battery capacity 2 to 32Ah, up to 100Ah for maintenance. Dimensions 5½x 2 x 1½ inches (L x W x H) Weight 0.7 lbs *) Back Current Drain is what the charger uses to drain the battery if the power cord is disconnected. The reverse current of the UC 800 is very low and corresponds to 1Ah per month. **) The ripple wave describes how many disturbances are exhibited by current and voltage. A rippled voltage can cause damage to other equipment connected to the battery. The UC 800 supplies voltage and current with very low voltage rippling. This increases the life of the battery and ensures that equipment connected to it will not be damaged.